technical ceramic solutions

News

Category Archives: News

New materials inspired by nature could make it safer to store nuclear waste

CLEMSON — Minerals that endure in nature for millions of years are inspiring a Clemson University-led research team to explore whether new materials could be developed to encase nuclear waste for safe storage.

 Kyle Brinkman works in the Olin Hall lab where he and his team are developing new materials that could help broaden nuclear-waste disposal options and lower storage and disposal costs.
Kyle Brinkman works in the Olin Hall lab where he and his team are developing new materials that could help broaden nuclear-waste disposal options and lower storage and disposal costs.

Glass is now used to isolate nuclear waste, but a team led by Clemson’s Kyle Brinkman is hoping to develop materials that are more stable. The team’s work could help broaden disposal options and lower storage and disposal costs.

The three-year project recently won an $800,000 research grant from the U.S. Department of Energy’s Nuclear Energy University Programs.

The team’s research is focused on crystalline ceramic that will be based on naturally occurring minerals that endure for millions of years. One example is hollandite that is dug out of the Italian Alps and shows promise for housing cesium.

“Our project is to learn from these naturally occurring, naturally stable minerals and design crystal structures that mimic them to incorporate waste elements we want to store,” said Brinkman, a Clemson associate professor of materials science and engineering.

Anand Gramopadhye, dean of the College of Engineering and Science, said the research is a good fit for South Carolina, where about half the energy is generated by nuclear power.

“It is vital to our health and our environment to find safe storage options for nuclear waste,” Gramopadhye said. “We owe it to South Carolina and our nation, not only for us, but also for our children and future generations.”

The research is aimed at giving policymakers the data they need to weigh options as they decide whether to recycle used nuclear fuel from commercial power plants. That waste is now kept at nuclear power plants in pools or dry-cask storage across the country.

Current U.S. policy is to not recycle used nuclear fuel.

Ashley Hearing, a graduate student from Marlton, New Jersey, works in the Olin Hall lab as part of research into whether nature could inspire new materials for storing nuclear waste.
Ashley Hearing, a graduate student from Marlton, New Jersey, works in the Olin Hall lab as part of research into whether nature could inspire new materials for storing nuclear waste.

Components of used nuclear fuel can be reprocessed into fresh fuel. But even with reprocessing, some leftover material is no longer usable.

The crystalline ceramic that researchers are developing would encase the leftover material. Once it’s trapped in the crystalline ceramic, it would be put in a container and buried in a miles-deep repository in a stable rock formation. The crystalline ceramic would act as a last line of defense, keeping the waste from spreading if it should ever come in contact with water.

Researchers believe the crystalline ceramic would be more stable than glass, which is now used by several countries to isolate high-level commercial and defense waste. The waste is melted into the glass, a process called vitrification, and then put it in a repository.

“Glass is a proven material for incorporating high-level waste,” Brinkman said. “However, over millions of years, it is believed that ceramics would be even better. So our project is to look at crystalline materials.”

Collaborators on the project are Rajendra K. Bordia, chairman of Clemson’s materials science and engineering department; Kenneth L. Reifsnider of the University of South Carolina; Wilson K.S. Chiu of the University of Connecticut; and James C. Marra of Savannah River National Laboratory.

“The research will help us strengthen ties between Clemson University and Savannah River National Laboratory,” Bordia said. “It also helps South Carolina boost its already strong national reputation in nuclear research. We’ve built a specialty in finding the safest ways to generate nuclear energy and dispose of the waste.”

Several separate nuclear-related projects are underway in Clemson’s College of Engineering and Science, including one that was recently awarded $5.25 million to conduct field experiments on waste.

Clemson researchers will make and analyze the crystalline materials but will not need to use nuclear waste for the research. They will send the ceramics to collaborators for further analysis and to make three-dimensional computer simulations.

Original Sourcing


Advances in Advanced Ceramics and Coating Processing

This recently published Special Issue of Advanced Engineering Materials, guest-edited by Eugene Medvedovski (Calgary, Canada) and Nahum Travitzky (Erlangen, Germany), is dedicated to novel processing of advanced ceramics, composites, and coatings. This includes both the research and optimization of earlier developed processing routes, which improve the productivity and quality of the materials.

The issue contains 18 invited papers prepared by or with participation of the well-recognized ceramic specialists from academia and industry. The manuscripts cover different aspects of ceramic and coating processing, such as: preparation and use of special ceramic powders and precursors materials, colloidal processing, forming routes of different advanced engineering (ceramics, composites, and coatings) for a variety of applications, materials consolidation, studies of the influence of processing on structure and properties of the materials, and large-scale manufacturing. The results of some selected papers have been presented at international conferences, but some papers describe absolutely new results. Some papers cover the extensive studies conducted by the authors for a number of years and even implementation of the materials and processes with the features of industrial experience. The readers can see that the papers presented in this issue were prepared by the authors from different countries of North America, Europe, Asia, and Australia, and they demonstrate a successful collaboration between the organizations not only from one country, but also from other countries and even continents.

Read selected articles now for free!

This review by Nahum Travitzky et al. summarizes recent achievements in the field of processing of ceramic-based materials with complex geometry using the main additive manufacturing technologies.

This review by Cordt Zollfrank et al. shows that the pairing of cellulose and silica produced materials ranging from cellulose-assisted preceramic green bodies via cellulose-silica composite aerogels to biotemplated high-surface and hierarchically nanostructured silica materials.

In this review by Günter Motz* et al. the development of CVD SiC fibers and three generations of polymer derived SiC fibers over the past 50 years are discussed, illustrating the effect of fiber precursor and processing on the microstructure and physical properties of the non-oxide ceramic fibers.

Sourcing: MaterialsViews


Advanced Ceramics in the Hunt for Comets-[CeramTec]

Piezoceramic multilayer actuators on board the “Rosetta” space probe

On 2 March 2004 at 08:17 CET, an Ariane 5 G+ booster rocket took off from the Kourou space centre in French Guiana. The mission: 67P/Churyumov–Gerasimenko. The payload: ESA’s 3-tonne “Rosetta” cometary probe including science experiments, the “Philae” lander – and8 piezoceramic multilayer actuators with a mass of 31.8 g.

 © ESA–S. Corvaja

Even at lift-off of the rocket booster 10 years ago, thepiezo actuators built into the “Philae” lander had to withstand the extreme vibrations and thermal shocks before leaving the Earth’s atmosphere. After achieving a near-Earth trajectory around the sun, “Rosetta” carried out several swing-by maneuvers persistently nearing its target: the comet 67P/Churyumov–Gerasimenko.

The probe spent part of the journey in hibernation mode – for 957 days in the freezing coldness of space, 660 million kilometers from the sun, only the on-board computer and some heating elements for the scientific payload were provided with energy.

According to plan, “Rosetta” was activated in January 2014 with the “Philae” lander being activated in March. After the meticulous and successful testing of all on-board instruments for their full operability, the probe will continue to close in on the comet from around two million kilometers to an eventual height of 10km. It is here that on 12 November 2014, a world’s-first should take place: “Philae” will detach from “Rosetta” and land on the comet 67P/Churyumov-Gerasimenko.

 © ESA 2001

Both probe and lander will then explore the comet during its active phase together, providing ESA’s scientists with an insight into the chemical and isotopic composition of the early solar system.

One of the instruments that will be used on the comet’s surface is the MIDAS (Micro-Imaging Dust Analysis System), a high-resolution atomic force microscope that can image the fine structure of individual dust particles and can even make individual atoms “visible”. MIDAS is to investigate the dust on the comet’s surface, analyze the mineral composition and if possible provide information about the age and journey of the comet.


 

The piezoceramic multilayer actuators from CeramTec are responsible for guiding the extremely fine measuring needles in the MIDAS instrument: actuator fine positioning of the highly sensitive needles takes place with a precision of 4 millionths of a millimeter. This means that a surface square with side lengths of a maximum of 100µm (= thousandths of a millimeter) will be scanned with a resolution (accuracy) of 4nm (= millionths of a millimeter). 100µm corresponds roughly to the thickness of a sheet of writing paper – 4nm is 25,000 times less.

Piezo actuators are typically used in precise positioning systems, but that is not their only use. PZT actuators are used for precision guidance in many systems, from laboratory technology and car manufacturing to machine engineering. Even if not quite as spectacular as with “Rosetta” and “Philae” – when precision, speed and power are needed, piezoceramic materials offer interesting and reliable solutions when it comes to micro-positioning, valve control, vibration damping or acoustics.

© ESA–AOES Medialab
We will only find out whether the “Rosetta” mission will be a success and if the “Philae” lander can begin its tasks on the 12 November at around 16:00 UTC – this is when the signal confirming the landing should reach the Earth, following a signal propagation delay of 28 minutes and 20 seconds.

© ESA/ATG medialab

Source Link: CeramTec

Ceramic Materials Tools

How to choose ceramic material? there is some material tools for your reference as below;

NIST Property Databases                  

Physical and Mechanical Test Standards 

Free Tools                                        


Researchers Offer New Insights on Nanocomposite Oxide Ceramic Properties

Researchers at the Los Alamos National Laboratory have discovered unique characteristics in nanocomposite oxide ceramics that hold promise for nuclear fuels, fast ion conductors, ferroelectrics, and for storage of nuclear waste.

Composites can be used for a wide range of applications, as their interfaces possess distinctive ionic and electronic properties that may help improve conductivity of materials.

This is a schematic depicting distinct dislocation networks for SrO- and TiO2-terminated SrTiO3/MgO interface. Credit: Los Alamos National Laboratory

The properties of nanocomposite oxide ceramics, as well as their structure, and potential applications have created interest among researchers. The project’s principal researcher from Los Alamos National Laboratory, Pratik Dholabhai, stated that the interfaces between the various crystalline regions of the material decide its electrical, radiation and transport properties. Further, the tolerance properties of the interfaces against fast ion conduction and radiation damage could be enhanced.

Composites can help improve the thermal conductivity of nuclear fuel. This property decides efficient energy extraction from fuel. The researchers at Los Alamos National Laboratory studied the interface between Strontium titanate (SrTiO3) and Magnesium oxide (MgO). At the SrTiO3/MgO heterointerfaces they found a powerful dependence on the termination chemistry. Alternating planes of TiO2 and SrO make up the SrTiO3 material.

The TiO2- and SrO- terminated interfaces were found to have surprisingly different atomic structures. Misfit dislocations characterize these types of structures. These dislocations occur when the different materials vary in size and affect the interface’s conductivity and other properties. Controlling the interface termination chemistry of oxide nanocomposites will help tailor their damage resistance to radiation, and transport properties.

The lead researcher of the study, Blas Uberuaga, stated that property of sensitivity of nanocomposite oxides’ interface structure to the interface’s chemistry holds promise for new research.

This study has been published in Nature Communications.


2014 Website Update Online

2014 Website Update Online

We are very excited to have finally launched our new website! A few of our goals with the new website were to make it faster, easier to navigate for users, and easier for us to manage/update. And most of all, we wanted to help our clients get to know us better. If you take a look around the new site we think you’ll get a pretty good idea of who we are and what we do as a company. Besides this we would like to share the knowledge about our product(s).

Some of the new features which have been added:

New Version: www.innovacera.com
Old Version: www.innovation-ceramics.com

We will keep update our website to make more easier using in the future, if there is any suggestion please feel free to get in touch.


Innovacera offer some of the China’s largest alumina ceramic components for manufacturing equipment

Innovacera offer some of the world’s largest alumina ceramic components for Industrial,LCD and Semiconductor manufacturing equipment, helping manufacturers achieve greater precision for today’s applications.

Alumina Ceramic Properties
High hardness
Wear resistant
Elextrical insulation
Chemical resistant
Tight tolerance
Temperature resistant
Food compatibility

Oxide ceramic materials we offer: 92%, 96%, 99.3% Alumina and Zirconia.


Technical ceramic solutions for your wear resistant solutions

Innovacera supply a variety of high-purity ceramic materials in Xiamen, China. We are a leading supplier of wear-resistant ceramics, offering solutions for abrasion and corrosion problems.

Our solutions are based on your application parameters: types of abrasion, system and equipment design, operating temperatures and materials. Innovacera’s fine-grained alumina, silicon nitride and zirconia ceramic offer properties that will optimize the solution for any wear application.

Wear-Resistant ceramic linings increase productivity in a variety of typical applications include:
Ash Lines                                                Centrifuges
Pipe Elbows                                           Chutes
Pump Housings                                    Tanks
Cyclones                                                 Transitions
Troughs and Flumes                            Dust Collectors
Spray Driers                                          Chippers and Chip Bins
Hoppers                                                 Wash Boxes
Dredging Equipment                           Silos
Screw Conveyors                                 Classifiers

Wear resisstance solution’s Project

chute ceramic lining

chute ceramic lining

ceramic lined pipe 04

ceramic lined pipe 04

ceramic lined pipe 13

ceramic lined pipe 13

ceramic lined pipe 10

ceramic lined pipe 10

ceramic lining pipe

ceramic lining pipe

To solve abrasion problems in your material handling systems, contact the experts at Innovacera mail sales@innovacera.com


Innovacera developed Ceramic Fluid Metering Pumps for Filling Machine

Innovacera is a professional supplier of technical ceramic components, has long-term cooperation in the research of ceramic materials with professors or researchers from universities and institutes in China. Innovacera was highly proud to announce that a new ceramic pump, named as valveless ceramic piston pump, has been approved by our customer testing.

Features
Innovacera ceramic pump has a liquid non-polluting, high precision, long service life…

  • Pharmaceutical, food cosmetic industry’s highest hygiene and health standards.
  • Inert chemical stability, acid, corrosion resistance, high temperature.
  • Hard and wear-resistant, particle release is extremely small, long service life.
  • Dense material, non water absorption, high surface treatment and low friction
  • Low thermal expansion coefficient, precise sealing and filling accuracy, achieve cleaning and sterilization online.

Properties

  • No valves to clog, hang up or service.
  • One moving part – the piston.
  • Accuracy better than ±0.5%.
  • Positive displacement up to 7 bar.
  • Viscosity independent.
  • Corrosion resistant wetted parts
  • Instantly reversible.
  • Large range of drives.

Applications

  • Medical Equipment
  • Electronic Manufacturing
  • Pilot Plants
  • Environment Pollution Control
  • Precision Cleaning
  • Automotive
  • Food & Dairy
  • Spraying Systems
  • Cosmetic & Hygiene
  • R & D Laboratories etc

Other related products as below

  • Piston and Ball Check Valve
  • Piston and Spool Valve
  • Piston and Rotary Valve
  • Rotary Piston
Ceramic Piston and Ball Check Valve

Ceramic Piston and Ball Check Valve

For more please feel free to contact us. Thank you!


Notification of INNOVACERA’S Xiamen Office Change

To: INNOVACERA’S Partner

Thanks for your supporting in the past year.

Effective from 1st April,2014, INNOVACERA will change its Xiamen Office as below:

Unit 4G, West Side, Lianchang Bldg, NO.8 Huli Avenue,
Huli District, Xiamen,
Fujian, China
361004

Tel: +0086 592 558 9730
Fax: +0086 592 558 9733
Email: sales@innovacera.com

While our office is changing, our bussiness scope, leagal status and contact details will remain the same.

We’ll be constantly striving to provide better products and service for you!

The INNOVACERA’S Team


Enquiry