Common Sintering Methods for Aluminum Nitride CeramicsTo prepare AlN ceramics with high thermal conductivity, two problems must be solved in the sintering process: the first one is to improve the dens…

What is the Difference Between the New Hot End and the Traditional Hot End? 1. The new hot end consists of the nozzle, heating element, cold end (other parts of the extruder), and integrates the heate…

Aluminum nitride is a non-natural existence of man-made crystals, with a hexagonal crystal system of fibrous zincite crystal structure, for the covalent bond is very strong compounds, lightweight, hig…

There are many kinds of electronic packaging substrates, and the commonly used substrates are mainly divided into plastic packaging substrates, metal packaging substrates and ceramic packaging substra…

Aluminum nitride ceramics have excellent thermal conductivity, reliable electrical insulation, low dielectric constant and dielectric loss, non-toxic and matched with the coefficient of thermal expans…

The most prominent feature of machinable ceramics is its good machinability. It can be turned, milled, planed, sawed, ground, cut, tapped, etc. using general-purpose metal processing equipment into a …

In the 2024 year, Innovacera will attend 4 foreign exhibitions including the Ceramitec 2024. If you happen to have attended or visit them, too, welcome to come to meet us at the exhibition. Below is m…

From the aspects of temperature resistance range, material hardness, insulation performance, thermal conductivity, bonding performance, etc., the specific distinctions are as follows.Thermal Conductiv…

Alumina ceramic bushings are widely used in electronic and electrical industries because of their high electrical insulation, ultra-high hardness and compressive strength. Alumina is an excellent high…

Pyrolytic boron nitride (PBN) belongs to the hexagonal crystal system, and its purity can reach 99.999%. It is acid and alkali resistant, anti-oxidation, has good thermal conductivity, is dense, and c…

Microporous ceramics refer to ceramic bodies that contain a large number of open or closed tiny pores inside or on the surface of the ceramic. The pore diameter is generally micron or sub-micron. It i…

Joining ceramics to other materials, also known as ceramic-metal or ceramic-polymer joining, has been an area of extensive research and innovation. Engineers and scientists have been exploring various…